Release time:

2022-07-28

1. Additional protective measures In the construction of high-rise buildings, the outer frame should be covered with bamboo slats or steel mesh at every step of the operation, and a 1m-high railing and bamboo slats should be set up on the outside. On the outside of the scaffold, set up a safety net. 2. Floor protection measures Concrete frame projects are now common, and they generally use steel tubes to support steel formwork construction. In order to do a good job in the protection of floor construction, floor guards can be used. The guard frame is equivalent to the height of two floors of the building, and the width of the guard frame is equivalent to the length of one bay of the building. 3. Protective measures for floor inclined racks In some concrete frame high-rise buildings, due to insufficient lifting equipment, it is inconvenient to install floor guards, so steel formwork is used to support them. It is best to set up an inclined cantilever around the building, the vertical height is the same as the height of the construction building, and a large crossbar is erected on the cantilever to pull the safety net diagonally.